Manual 01 - Battery Cover

Before disassembling the iPhone, thoroughly wash and dry your hands.

Make sure handset is powered off. Use a SIM card eject tool or a paperclip to eject the SIM card tray. This may require a significant amount of force.

Place the SIM card and SIM card tray in COMPARTMENT A.

Place the handset in your non-dominant hand. Remove two Pentalobe screws near charging port with special 5-point Pentalobe screwdriver. Place screws in SLOT 1.

Gently slide battery cover upwards. Pull battery cover away from iPhone. Place battery cover in ZONE I.

Replace battery cover from ZONE I (or replacement part). Gently slide battery cover downward until it locks into place.

Place the handset in your non-dominant hand, then replace two Pentalobe screws near charging port with special 5-point Pentalobe screwdriver. The screws are in SLOT 1.

Replace the SIM card and SIM card tray from Sandbox COMPARTMENT A.