Manual 01 - Loudspeaker

Written By: James Linder
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

4

Flags

0

  1. Power down the device. Remove the battery cover and place it in ZONE I. Remove the battery cover and place it in ZONE I.

    • Power down the device.

    • Remove the battery cover and place it in ZONE I.

    Edit

  2. Remove two 3.6 mm T4 Torx screws. Place them in SLOT 1. Use the pointed end of the spudger to pry up the speaker assembly. Remove it with your fingers and place it in ZONE I (below battery cover). Use the pointed end of the spudger to pry up the speaker assembly. Remove it with your fingers and place it in ZONE I (below battery cover).

    • Remove two 3.6 mm T4 Torx screws. Place them in SLOT 1.

    • Use the pointed end of the spudger to pry up the speaker assembly. Remove it with your fingers and place it in ZONE I (below battery cover).

    Edit

  3. Replace speaker assembly from ZONE I: Position top edge first then push speaker assembly fully into place. Replace two 3.6 mm T4 Torx screws from SLOT 1 to secure speaker assembly.

    • Replace speaker assembly from ZONE I:

    • Position top edge first then push speaker assembly fully into place.

    • Replace two 3.6 mm T4 Torx screws from SLOT 1 to secure speaker assembly.

    Edit

  4. Seat battery cover from ZONE I. Power up and test device. Power up and test device.

    • Seat battery cover from ZONE I.

    • Power up and test device.

    Edit
Finish Line

Author

James Linder

Member since: 01/24/2013

71,531 Reputation

216 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 21

CELL PHONE SANDBOX