Skip to main content
  1. Before disassembly, thoroughly wash and dry your hands. Remove the stylus, battery cover and battery. Place in ZONE I. Remove SIM card and SD card. Place in COMPARTMENT A.
    • Before disassembly, thoroughly wash and dry your hands.

    • Remove the stylus, battery cover and battery. Place in ZONE I.

    • Remove SIM card and SD card. Place in COMPARTMENT A.

    • Remove twelve 4.0 mm #00 Phillips screws. Place in SLOT 1.

  2. Insert the pointed end of the spudger into the stylus slot (Picture 1).  Lift up to create enough space to grab the mid-frame, as in Picture 2. Use your fingers to gently peel up mid-frame. Place mid-frame in ZONE II.
    • Insert the pointed end of the spudger into the stylus slot (Picture 1). Lift up to create enough space to grab the mid-frame, as in Picture 2.

    • Use your fingers to gently peel up mid-frame.

    • Place mid-frame in ZONE II.

  3. Replace mid-frame from ZONE II.  Note the clips at the top of the mid-frame. Place the mid-frame clips in their slots at the top of the front panel before seating the rest of the mid-frame.
    • Replace mid-frame from ZONE II. Note the clips at the top of the mid-frame.

    • Place the mid-frame clips in their slots at the top of the front panel before seating the rest of the mid-frame.

  4. Replace twelve 4.0 mm Phillips screws from SLOT 1. Replace the SD card & SIM card from COMPARTMENT A. Replace the battery cover, battery and stylus from ZONE I.
    • Replace twelve 4.0 mm Phillips screws from SLOT 1.

    • Replace the SD card & SIM card from COMPARTMENT A.

    • Replace the battery cover, battery and stylus from ZONE I.

Finish Line

James Linder

Member since: 01/24/2013

71,531 Reputation

216 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 43

CELL PHONE SANDBOX