Skip to main content

Parts

No parts specified.

  1. Before disassembling the Samsung Galaxy S3, thoroughly wash and dry your hands. Picture 1: Remove battery cover and battery. Place into ZONE I. Picture 2: Remove SIM card, and SD card.  Place in COMPARTMENT A.
    • Before disassembling the Samsung Galaxy S3, thoroughly wash and dry your hands.

    • Picture 1: Remove battery cover and battery. Place into ZONE I.

    • Picture 2: Remove SIM card, and SD card. Place in COMPARTMENT A.

    • Picture 3: Remove ten 4.0 mm Phillips screws. Place in SLOT 1.

  2. Use your fingers to pull the mid-frame away from the phone. Place into ZONE II. Use your fingers to pull the mid-frame away from the phone. Place into ZONE II.
    • Use your fingers to pull the mid-frame away from the phone. Place into ZONE II.

  3. Picture 1 & 2: Replace the mid-frame on the phone from ZONE II. Picture 2: Replace ten 4.0 mm Phillips screws from SLOT 1. Picture 2: Replace ten 4.0 mm Phillips screws from SLOT 1.
    • Picture 1 & 2: Replace the mid-frame on the phone from ZONE II.

    • Picture 2: Replace ten 4.0 mm Phillips screws from SLOT 1.

  4. Replace SIM card and SD card from COMPARTMENT A.
    • Replace SIM card and SD card from COMPARTMENT A.

    • Replace battery cover and battery from ZONE I.

Finish Line

James Linder

Member since: 01/24/2013

71,531 Reputation

216 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 52

CELL PHONE SANDBOX